| Structural design | Rocker valve with diaphragm seal |
|---|---|
| Sealing principle | Soft |
| Materials in contact with the media | EPDM |
| For use in the food industry | See supplementary material information |
| Valve function | 2/2, closed, monostable |
| Nominal width | 1.2mm |
| Flow direction | Reversible with restrictions |
| Actuation type | Electrical |
| Type of control | Direct |
| Reset method | Mechanical spring |
| Manual override | None |
| Mounting position | Any |
| Type of mounting | With through-hole for M2 screw |
| Electrical connection 1, connection type | Socket |
| Electrical connection 1, connection technology | Connection diagram Q7 |
| Electrical connection 1, number of pins/wires | 2 |
| Electrical connection for input 1, connection pattern | 00997312 |
| Size | 7 |
| Width dimension | 7.5mm |
| Fluid connector | Flange |
| Medium | Liquid media |
| Information on medium | Observe resistance of materials that come into contact with media |
| Internal volume | 18 µl fluid chamber valve |
| Temperature of liquid media | 0°C |
| Medium temperature gaseous media | 0°C |
| Ambient temperature | 0°C |
| Storage temperature | -20°C |
| Medium pressure | -0.05MPa |
| Medium pressure | -0.5bar |
| Medium pressure | -7.25psi |
| Note on the medium pressure | IN: -0.25 – 2 bar / -0.025 – 0.2 MPa / -3.625 – 29 psi |
| Pressure difference | 0.2MPa |
| Differential pressure | 2bar |
| Pressure difference | 29psi |
| Burst pressure | 2.3MPa |
| Burst pressure | 23bar |
| Burst pressure | 333.5psi |
| DC operating voltage range | 12V |
| Note on operating voltage range DC | With electrical sub-base VAVE-K1-… |
| Permissible voltage fluctuations | +/- 10 % |
| Electrical power consumption | 3.5W |
| Note on power consumption | Low-current phase 0.3 W, high-current phase 3.5 W for 60 ms, in combination with VAVE-K1-… |
| Coil characteristics | 12 – 26 V DC: low-current phase 0.06 W, high-current phase 2.2 W |
| Insulation class | B |
| Duty cycle | 100% in combination with holding current reduction |
| Max. switching frequency | 6Hz |
| Note on switching frequency | Dependent on the ambient temperature and installation state |
| Response time "on" for liquid media | 5ms |
| Switching time on gaseous media | 5ms |
| Standard nominal flow rate | 10l/min |
| Note on standard nominal flow rate | At a pressure drop of 1 -> 0 bar (gaseous media) |
| Flow rate Kv | 0.018m³/h |
| Flow rate Kv | 0.3l/min |
| Note on flow rate Kv | For the medium water |
| Water flow rate at max. operating pressure | 0.027 m³/h |
| Symbol | 00992884 |
| Housing material | PA-reinforced |
| Diaphragm material | EPDM |
| Seals material | EPDM |
| Note on materials | RoHS-compliant |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Product weight | 10.9g |
| Degree of protection | IP40 |
| Note on degree of protection | In mounted state |
| Application note | For indoor use only |
| Corrosion resistance class (CRC) | 0 – No corrosion stress |
| Weight | 0.038912 lbs |
|---|---|
| Dimensions | 2.952756 × 1.732283 × 0.472441 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet