| Type of mounting | Mounting plate, screwed on |
|---|---|
| Mounting position | Free convection |
| Product weight | 2200g |
| Display | LED green/yellow/red |
| Control elements | Optional: CDSB operating unit |
| Conforms to standard | EN 61800-3 |
| Based on norm | EN 50581 |
| Certification | RCM compliance mark |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Certificate issuing authority | German Technical Control Board (TÃœV) Rheinland 01/205/5640.00/18 |
| Storage temperature | -25°C |
| Ambient temperature | 0°C |
| Note on ambient temperature | Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C. |
| UL-ambient temperature | 0°C |
| Relative air humidity | 5 – 90 % |
| Max. installation height | 2000m |
| Information on max. installation height | 1% power reduction/100 m above 1000 m. |
| Degree of protection | IP20 |
| Protection class | I |
| Overvoltage category | III |
| Contamination level | 2 |
| Surge resistance | 6kV |
| Note on materials | RoHS-compliant |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Nominal operating voltage phases | 3-phase |
| Nominal operating voltage AC | 400V |
| Permissible voltage fluctuations | +/- 10 % |
| Input voltage range AC | 200V |
| Mains frequency | 48Hz |
| Nominal current load supply | 6A |
| Peak current, load supply | 18A |
| Active PFC | no |
| Line filter | Integrated |
| System voltage to EN 61800-5-1 | 300V |
| Max. short circuit protection of mains | 10kA |
| Mains types | TN |
| Nominal voltage, load supply DC | 560V |
| Load supply permissible range | ± 10 % |
| Max. DC link voltage | 800V |
| Braking resistor, integrated | 130Ohm |
| Pulse power of braking resistor | 5kVA |
| Pulse energy for braking resistor | 850Ws |
| Braking resistor nominal power (IEC) | 58W |
| Braking resistor, external | 80Ohm |
| Max. continuous output of the external braking resistor (IEC) | 1200W |
| Nominal voltage, logic supply DC | 24V |
| Permissible range of logic voltage | ± 20 % |
| Max. current consumption for logic supply without clamping brake | 0.5A |
| Max. current consumption for logic supply with parking brake | 1.8A |
| Max. current consumption for logic supply with clamping brake and I/O | 2.5A |
| Output voltage range AC | 3x (0 – input) V |
| Nominal current per phase, effective | 5A |
| Peak current per phase, effective | 15A |
| Max. peak current duration | 2s |
| Controller nominal power | 2500VA |
| Peak power | 7500VA |
| Output frequency | 0Hz |
| Max. length of motor cable without ext. mains filter | 50m |
| Max. output current of holding brake | 1.3A |
| Max. voltage drop from logic supply to brake output | 1V |
| Number of inputs for motor temperature sensor | 1 |
| Controller operating mode | Cascade control |
| Mode of operation | Field-oriented regulation |
| Ethernet interface, function | Parameterization and commissioning |
| Ethernet interface, protocol | TCP/IP |
| Fieldbus interface, protocol | EtherCAT |
| Fieldbus interface, function | Bus connection, incoming/forwarding |
| Fieldbus coupling | EtherCAT |
| Communication profile | CiA402 |
| Process interfacing | AC1: Adjustable-Speed Drives |
| Fieldbus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface, connection type | 2x socket |
| Fieldbus interface, connection technology | RJ45 |
| Encoder interface, function | BiSS-C |
| Encoder interface 2, function | Incremental encoder |
| Synchronization interface, function | Encoder emulation A/B/Z |
| Encoder interface output, characteristics | 1 MHz maximum output frequency |
| Encoder interface input, characteristics | 1 MHz maximum output frequency |
| Number of digital logic inputs | 12 |
| Input switching logic | PNP (positive switching) |
| Characteristics of logic input | Freely configurable in some cases |
| Logic input specification | Based on IEC 61131-2, type 3 |
| Work range of logic input | -3V |
| Number of high-speed logic inputs | 2 |
| Time resolution of high-speed logic inputs | 1µs |
| Number of digital logic outputs 24Â VÂ DC | 6 |
| Switching logic at outputs | PNP (positive switching) |
| Characteristics of digital logic outputs | Freely configurable in some cases |
| Max. current of digital logic outputs | 20mA |
| Number of high-speed switching outputs | 2 |
| Time resolution of high-speed switching outputs | 1µs |
| Number of floating switching outputs | 1 |
| Max. current of the floating switching outputs | 50mA |
| Number of analog setpoint inputs | 1 |
| Characteristics of setpoint inputs | Differential inputs |
| Work range of setpoint input | ± 10 V |
| Operating range of analog inputs | ± 10 V |
| Impedance of setpoint input | 70kOhm |
| Safety function | Safe brake control (SBC) |
| Safety integrity level (SIL) | Safe brake control (SBC)/SIL 3/SILCL 3 |
| Performance Level (PL) | Safe brake control (SBC)/category 3, performance level e |
| Diagnostic coverage | 97% |
| SFF safe failure fraction | 99% |
| Hardware fault tolerance | 1 |
| Number of safe 2-pin inputs | 2 |
| Number of diagnostic outputs | 2 |
| Weight | 5.130157 lbs |
|---|---|
| Dimensions | 12.204724 × 11.023622 × 3.149606 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet