| Dimensions W x L x H | 75.9 mm x 124.3 mm x 82.5 mm |
|---|---|
| Power supply, type of connection | Terminal strip |
| Vibration resistance | Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6 |
| Ethernet interface, protocol | Modbus® TCPEasyIPTCP/IP |
| Fieldbus interface, connection type | 2x socket |
| Storage medium | Micro SD <= 32 GBUSB memory stick <= 32 GB |
| Fieldbus interface 2, protocol | EtherCAT Master |
| Note on ambient temperature | -5 – 60 °C for vertical installation |
| Fieldbus interface 2, connection type | Socket |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 150 mA |
| Ethernet interface, connection technology | RJ45 |
| Fieldbus interface 2, connection technology | RJ45 |
| Fieldbus interface 2, connection pattern | 995789 |
| Fieldbus interface, connection pattern | 995789 |
| Power supply, connection pattern | 995847 |
| Fieldbus interface, function | Bus connection, incoming/forwarding |
| Ethernet interface, transmission rate | 10 Mbit/s100 Mbit/s |
| Power supply, function | Electronics and sensors |
| USB interface | USB 2.0 |
| Fieldbus interface 2, transmission rate | 100 Mbit/s |
| Fieldbus interface 2, galvanic isolation | yes |
| Power supply, information on conductor diameter | 0.2 – 2.5 mm² for flexible conductors without cable end sleeves |
| Ethernet interface, function | SwitchDiagnostics |
| System parameter | Diagnostic memorySystem startFail-safe response |
| Fieldbus interface 2, function | Bus connection, forwarding |
| Ethernet interface, connection pattern | 995789 |
| Fieldbus interface, connection technology | RJ45 |
| Power supply, connection technology | Spring-loaded terminal |
| Fieldbus interface, protocol | PROFINET IO |
| Fieldbus interface 2, type | Ethernet |
| Shock resistance | Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 |
| Module parameters | Undervoltage diagnosticsAnalog module process value representationChannel alarms for undervoltageChannel alarm bundling |
| Ethernet interface, connection type | 2x socket |
| Diagnostics via LED | Maintenance requiredNetwork status, port 1Engineering port 2 network statusNetwork errorEtherCAT network statusNetwork status, engineering port 1System faultNetwork status, port 2Power supply for electronics/sensorsRunForce modeLoad power supply |
| Fieldbus interface 2, number of poles/wires | 8 |
| Ethernet interface, number of poles/wires | 8 |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power supply, number of pins/wires | 4 |
| Fieldbus interface, number of poles/wires | 8 |
| Fieldbus interface, max. address volume for outputs | 512 byte |
| Fieldbus interface, max. address volume for inputs | 512 byte |
| Max. number of modules | 10 |
| Power supply, conductor diameter | 0.2 mm² … 1.5 mm² |
| Width dimension | 18.9 mm |
| Type code | CPX-E |
| CPU data | 512 MB RAMDual core 766 MHz |
| Configuration support | Operator unit CDSBGSDML fileCODESYS V3 |
| Additional functions | CODESYS V3 with SoftMotion |
| Control elements | Optional: CDSB operating unitDIL switch for RUN/STOP |
| Processing time | Approx. 200 µs/1 k instruction |
| IP address setting | Via CODESYSDHCPOptional: via CDSB operating unit |
| Function blocks | and othersRead CPX-E module diagnosticsCPX-E diagnostic statusCopying of CPX-E diagnostic trace |
| Max. power supply | 0.333333333333333 |
| Flag | 120 kB remanent dataCODESYS variable concept |
| Power failure buffering | 20 ms |
| Programming software | CODESYS provided by Festo |
| Program memory | 12 MB user program |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Corrosion resistance class (CRC) | 0 – No corrosion stress |
| Storage temperature | -20 °C … 70 °C |
| Relative air humidity | Non-condensing95 % |
| Protection against direct and indirect contact | PELV |
| Degree of protection | IP20 |
| Ambient temperature | -5 °C … 50 °C |
| Certification | c UL us – Listed (OL)RCM compliance mark |
| Product weight | 288 g |
| Max. address capacity outputs | 64 byte |
| Max. address capacity inputs | 64 byte |
| Fieldbus interface, galvanic isolation | yes |
| Fieldbus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface, type | Ethernet |
| Type of mounting | With H-rail |
| Note on materials | RoHS-compliantContains paint-wetting impairment substances |
| Housing material | PA |
| Weight | 0.751776 lbs |
|---|---|
| Dimensions | 7.874016 × 7.480315 × 3.149606 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet