CMMP-AS-C2-3A-M0

$1,349.87

A very cost-effective and compact motor controller with pulse train technology and integrated auto-tuning function. When combined with the EMMB-AS servo motor, it is ideal for simple positioning tasks in the electronics industry, small parts assembly, or for desktop applications

SKU: 1622901 Category: Tag:
Festo
Type code CMMP-AS
Active PFC yes
Line filter Integrated
Safety function Safe stop 1 (SS1)Safe torque off (STO)
Safety integrity level (SIL) Safe torque off (STO)/SIL 3/SILCL 3
Performance Level (PL) Safe torque off (STO)/category 4, performance level e
Display Seven-segment display
Output frequency 0 Hz … 1000 Hz
Output voltage range AC 3x 0 – 270 V
Braking resistor 60 Ohm
Diagnostic coverage 0.97
Characteristics of digital logic outputs Freely configurable in some casesGalvanically isolated
Hardware fault tolerance 1
Impedance of setpoint input 20 kOhm
Pulse power of braking resistor 2.8 kVA
Max. current of digital logic outputs 100 mA
Max. peak current duration 5 s
Max. DC link voltage 320 V
Nominal output current 2.5 A
Nominal operating voltage AC 230 V
Controller nominal power 500 VA
Nominal voltage, logic supply DC 24 V
Nominal current 2 A … 3 A
Mains frequency 50 Hz … 60 Hz
Parameterization interface USBEthernetParameterization and commissioning
Nominal operating voltage phases 1-phase
SFF safe failure fraction 0.9917
Peak power 1000 VA
Peak current per phase, effective 0.208333333333333
Max. current consumption for logic supply without clamping brake 0.55 A
Contamination level 2
Permissible range of logic voltage ± 20 %
Permissible voltage fluctuations +/- 10 %
Certificate issuing authority German Technical Control Board (TÃœV) Rheinland
CE marking (see declaration of conformity) As per EU low voltage directiveas per EU machinery directiveAs per EU EMC directive
Storage temperature -25 °C … 70 °C
Relative air humidity 0 – 90 %
Degree of protection IP20IP10
Ambient temperature 0 °C … 40 °C
Certification RCM compliance markc UL us – Listed (OL)
Proof test interval 20 y
Product weight 2100 g
Number of analog monitor outputs 2
Number of analog setpoint inputs 2
Number of digital logic outputs 24 V DC 5
Number of digital logic inputs 10
Communication profile DS301/DSP402
Process interfacing For 256 positioning blocksI/O coupling
Work range of logic input 8 V … 30 V
Working range of monitor outputs ± 10 V
Work range of setpoint input ± 10 V
Resolution of monitor outputs 9 bit
Encoder interface output, characteristics Resolution 16384 ppr
Encoder interface input, characteristics RS422EnDat®SINCOSHIPERFACE3-phase encoder signals
Characteristics of monitor outputs Short circuit-proof
Characteristics of setpoint inputs Configurable for currentConfigurable for rotational speedDifferential inputs
Characteristics of logic input Freely configurableGalvanically isolated
Output encoder interface, function Actual value feedback via encoder signals in speed control mode.Setpoint specification for downstream slave actuator.
Input encoder interface, function As speed setting of the slave actuator in synchronous mode.Encoder signal speed setpoint value.
Bus connection Sub-D9-pinSocket
Fieldbus coupling CANopenModbus®/TCP
Max. fieldbus transmission rate 1 Mbit/s
Type of mounting On sub-baseScrewed tightly
Note on materials Contains paint-wetting impairment substancesRoHS-compliant

Coast Pneumatics

Get Shipping Quote

Close
Subheading