| Type code | PZVT |
|---|---|
| Design | Mechanical sequence counter with pneumatic actuator |
| Switch-off pressure | ≤ 0.1 bar |
| Operating pressure | 2 bar … 6 bar |
| Switch-on pressure | ≥ 1.6 bar |
| Standard nominal flow rate | 50 l/min |
| Adjustable delay time | 20 s … 300 s |
| Setting accuracy | ± 6 s |
| Pause period for reset | ≥ 200 ms |
| Repetition accuracy of time setting | ± 3 s |
| Explosion prevention and protection | Zone 22 (ATEX)Zone 21 (ATEX)Zone 1 (ATEX)Zone 2 (ATEX) |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication not possible |
| Degree of protection | IP54as per IEC 60529With protective cap and panel frame |
| Ambient temperature | -10 °C … 60 °C |
| Product weight | 45 g |
| Type of mounting | Front panel mounting |
| Pneumatic connection | Internal thread M5 |
| Note on materials | RoHS-compliant |
| Housing material | ABS |
PZVT-300-SEC
$528.87
Pneumatic timer for implementing switching delays. With adjusting screw and visual indicator.
1 review for PZVT-300-SEC
Only logged in customers who have purchased this product may leave a review.
John (verified purchase) –
Good fast shipping, just a bit pricey.