| Ambient temperature | -15°C |
|---|---|
| Note on ambient temperature | Up to 80 °C with derating of -1.5% per degree Celsius |
| Max. installation height | 4000m |
| Information on max. installation height | with 1,000 m and longer only with derating of -1.0% per 100 m |
| Storage temperature | -20°C |
| Relative air humidity | 0 – 90 % |
| Conforms to standard | IEC 60034 |
| Thermal class according to EN 60034-1 | F |
| Max. winding temperature | 155°C |
| Rating class according to EN 60034-1 | S1 |
| Temperature monitoring | Digital motor temperature transmission via EnDat® 2.2 |
| Motor type as per EN 60034-7 | IM B5 |
| Mounting position | Any |
| Degree of protection | IP40 |
| Note on degree of protection | IP40 for motor shaft without rotary shaft seal |
| Concentricity, coaxiality, axial runout according to DIN SPEC 42955 | N |
| Balancing quality | G 2.5 |
| Detent torque | < 1.0% of peak torque |
| Storage lifetime, under nominal conditions | 20000h |
| Interface code, motor out | 80P |
| Electrical connection 1, connection type | Hybrid plug |
| Electrical connection 1, connection technology | M23x1 |
| Electrical connection 1, number of pins/wires | 15 |
| Electrical connection for input 1, connection pattern | 00995913 |
| Contamination level | 2 |
| Note on materials | RoHS-compliant |
| Corrosion resistance class (CRC) | 0 – No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Vibration resistance | Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 |
| Certification | RCM compliance mark |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Certificate issuing authority | UL E342973 |
| Nominal operating voltage DC | 565V |
| Type of winding switch | Star inside |
| Number of pole pairs | 5 |
| Stall torque | 4.3Nm |
| Nominal torque | 3.4Nm |
| Peak torque | 13.5Nm |
| Nominal rotary speed | 30001/min |
| Max. rotational speed | 65001/min |
| Max. mechanical speed | 140001/min |
| Motor nominal power | 1070W |
| Continuous stall current | 4.8A |
| Motor nominal current | 3.8A |
| Peak current | 21.7A |
| Motor constants | 0.9Nm/A |
| Standstill torque constant | 1Nm/A |
| Voltage constant, phase-to-phase | 61.4mVmin |
| Phase-phase winding resistance | 2.21Ohm |
| Winding inductance phase-phase | 10.7mH |
| Winding longitudinal inductivity Ld (phase) | 6.6mH |
| Cross inductivity Lq (phase) | 8mH |
| Electric time constant | 7.2ms |
| Thermal time constant | 51min |
| Thermal resistance | 0.65K/W |
| Measuring flange | 250 x 250 x 15 mm, steel |
| Total output inertia moment | 1.91kgcm² |
| Product weight | 3910g |
| Permissible axial shaft load | 120N |
| Permissible radial shaft load | 620N |
| Rotor position sensor | Absolute encoder, single-turn |
| Rotor position sensor for manufacturer designation | ECI 1118 |
| Rotor position encoder for absolutely detectable revolutions | 1 |
| Rotor position sensor interface | EnDat® 22 |
| Rotor position sensor measuring principle | Inductive |
| Rotor position encoder for DC operating voltage | 5V |
| Rotor position encoder for DC operating voltage range | 3.6V |
| Rotor position encoder for positional values per revolution | 262144 |
| Rotor position sensor resolution | 18bit |
| Rotor position encoder system accuracy angle measurement | -120arcsec |
| MTTF, subcomponent | 190 years, rotor position sensor |
| Energy efficiency | ENEFF (CN) / Class 2 |
| Weight | 10.130241 lbs |
|---|---|
| Dimensions | 14.370079 × 7.480315 × 7.086614 in |
| Total mass moment of inertia of output | 1.91 kgcm? |
| Nominal torque | 3.4 Nm |
| Nominal rotary speed | 3000 1/min |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet