electrical interface CPX-CTEL-2-M12-5POL-LK Dimensions W x L x H=(* (including interlinking block), * 50 mm x 107 mm x 55 mm), Diagnosis=(* – Communication error, * – Module short circuit, * – Module-orientated diagnostics, * – Undervoltage), Parameters configuring=(* – Diagnostic behaviour, * Failsafe per channel, * Forces per channel, * Idle mode per channel, * – Module parameters), Control elements=DIL switches, LED displays=(* PS: electronics supply power, sensor supply power, * PL: load supply, * X1: system status IO-Link port 1, * X1: system status IO-Link port 2, * Group diagnostics)
| Dimensions W x L x HÂ | (including interlinking block)50 mm x 107 mm x 55 mm |
|---|---|
| Diagnosis | ‘- Communication error- Module short circuit- Module-orientated diagnostics- Undervoltage |
| Parameters configuring | ‘- Diagnostic behaviourFailsafe per channelForces per channelIdle mode per channel- Module parameters |
| Control elements | DIL switches |
| LED displays | PS: electronics supply power, sensor supply powerPL: load supplyX1: system status IO-Link port 1X1: system status IO-Link port 2Group diagnostics |
| Operating voltage range DCÂ | 18 … 30 V |
| Intrinsic current consumption at operating voltage | Typ. 65 mA |
| Nominal operating voltage DCÂ | 24 V |
| Power failure buffering | 10 ms |
| Electrical isolation channel – internal bus | Yes, for intermediate supply |
| Electrical isolation channel – channel | No |
| Corrosion resistance classification CRCÂ | 1 – Low corrosion stress(when installed) |
| Storage temperature | ‘-20 … 70 °C |
Reviews
There are no reviews yet