Type code | SFAH |
---|---|
Pneumatic connection, outlet direction | Straight |
Protection against tampering | IO-Link®PIN code |
Electrical connection for input 1, connection pattern | 995428 |
Electrical connection 1, connection type | Plug |
Electrical connection 1, connection technology | Connection diagram L1J |
KC characters | KC EMC |
Electrical connection 1, number of pins/wires | 4 |
Idle current | ≤ 25 mA |
Symbol | 995795 |
Certification | RCM compliance mark |
CE marking (see declaration of conformity) | As per EU RoHS directiveAs per EU EMC directive |
Note on materials | RoHS-compliant |
Measured variable | Mass flow rateVolumetric flow rate |
Flow direction | Unidirectional |
Measuring principle | Thermal |
Method of measurement | Heat transfer |
Flow measuring range start value | 0.2 l/min |
Flow measuring range end value | 10 l/min |
Operating pressure | -0.9 bar … 10 bar |
Operating medium | ArgonCompressed air as per ISO 8573-1:2010 [6:4:4]Nitrogen |
Temperature of medium | 0 °C … 50 °C |
Ambient temperature | 0 °C … 50 °C |
Accuracy of flow rate | ± (2% o.m.v. + 1% FS) |
Zero point repetition accuracy in ± %FS | 0.2 %FS |
Repetition accuracy margin in ± %FS | 0.8 %FS |
Temperature co-efficient margin in ± %FS/K | typ. 0.15% FS/K |
Pressure influence of margin in ±%FS/bar | 1 %FS/b. |
Switching output | 2 x PNP or 2 x NPN switchable |
Switching function | Auto difference monitoringThreshold value comparatorWindow comparator |
Switching element function | N/C contact/N/O contact switchable |
Max. output current | 100 mA |
Analog output | 4 – 20 mA0 – 10 V1 – 5 V |
Flow rate curve start value | 0 l/min |
Flow rate curve end value | 10 l/min |
Max. load resistance of current output | 500 Ohm |
Min. load resistance of voltage output | 20 kOhm |
Short-circuit protection | yes |
Overload protection | Available |
Protocol | IO-Link® |
IO-Link®, protocol version | Device V 1.1 |
IO-Link®, profile | Smart sensor profile |
IO-Link®, function classes | IdentificationDiagnosticsBinary data channel (BDC)Process data variable (PDV)Teach channel |
IO-Link®, communication mode | COM2 (38,4 kBd) |
IO-Link®, SIO mode support | Yes |
IO-Link®, port class | A |
IO-Link®, process data width IN | 3 Byte |
IO-Link®, process data content IN | 1 bit BDC (volume monitoring)14 bit PDV (flow measurement)2 bit BDC (flow monitoring) |
IO-Link®, service data contents IN | 32 bit volume/mass measurement |
IO-Link®, minimum cycle time | 4 ms |
IO-Link®, data memory required | < 500 byte |
DC operating voltage range | 22 V … 26 V |
Reverse polarity protection | for all electrical connections |
Type of mounting | With accessories |
Mounting position | Any |
Pneumatic connection | For pneumatic tubing outside diameter 6 mm |
Product weight | 60 g |
Housing material | PA-reinforced |
Materials in contact with the media | PA-reinforcedSilicon nitrideHigh-alloy stainless steelWrought aluminum alloy, anodizedSiliconEpoxyNBR |
Display type | Illuminated LCD, multi-color |
Displayable unit(s) | l/hglscft/minscftl/ming/minscft/h |
Setting options | IO-Link®Teach-inVia display and pushbuttons |
Degree of protection | IP40 |
Pressure drop | < 5 mbar |
Protection class | III |
Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
SFAH-10U-Q6S-PNLK-PNVBA-L1
$436.09
The highly flexible SFAH monitors the flow rate of compressed air and non-corrosive gases. Many industry sectors will appreciate the flexibility it offers in terms of its compact design (20 x 58 mm), numerous installation options, and space-saving adjustable QS elbow connections.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet