Type of mounting | Mounting plate, screwed on |
---|---|
Mounting position | Free convection |
Product weight | 1300g |
Display | LED green/yellow/red |
Control elements | Optional: CDSB operating unit |
Conforms to standard | EN 61800-3 |
Based on norm | EN 50581 |
Certification | RCM compliance mark |
KC characters | KC EMC |
CE marking (see declaration of conformity) | As per EU EMC directive |
UKCA marking (see declaration of conformity) | To UK instructions for EMC |
Certificate issuing authority | German Technical Control Board (TÃœV) Rheinland 01/205/5640.00/18 |
Storage temperature | -25°C |
Ambient temperature | 0°C |
Note on ambient temperature | Above an ambient temperature of 40 °C, the power must be reduced by 3%/°C. |
UL-ambient temperature | 0°C |
Relative air humidity | 5 – 90 % |
Max. installation height | 2000m |
Information on max. installation height | 1% power reduction/100 m above 1000 m. |
Degree of protection | IP20 |
Protection class | I |
Overvoltage category | III |
Contamination level | 2 |
Surge resistance | 6kV |
Note on materials | RoHS-compliant |
LABS (PWIS) conformity | VDMA24364 zone III |
Nominal operating voltage phases | 1-phase |
Nominal operating voltage AC | 230V |
Permissible voltage fluctuations | -20 % / +15 % |
Input voltage range AC | 100V |
Mains frequency | 48Hz |
Nominal current load supply | 2.8A |
Peak current, load supply | 8.4A |
Active PFC | no |
Line filter | Integrated |
System voltage to EN 61800-5-1 | 300V |
Max. short circuit protection of mains | 100kA |
Mains types | TT |
Nominal voltage, load supply DC | 320V |
Load supply permissible range | -20 %/+15 % |
Max. DC link voltage | 395V |
Braking resistor, integrated | 100Ohm |
Pulse power of braking resistor | 1.6kVA |
Pulse energy for braking resistor | 230Ws |
Braking resistor nominal power (IEC) | 23W |
Braking resistor, external | 100Ohm |
Max. continuous output of the external braking resistor (IEC) | 180W |
Nominal voltage, logic supply DC | 24V |
Permissible range of logic voltage | ± 20 % |
Max. current consumption for logic supply without clamping brake | 0.5A |
Max. current consumption for logic supply with parking brake | 1.5A |
Max. current consumption for logic supply with clamping brake and I/O | 2.3A |
Output voltage range AC | 3x (0 – input) V |
Nominal current per phase, effective | 2A |
Peak current per phase, effective | 6A |
Max. peak current duration | 2s |
Controller nominal power | 350VA |
Peak power | 1000VA |
Output frequency | 0Hz |
Max. length of motor cable without ext. mains filter | 25m |
Max. output current of holding brake | 1A |
Max. voltage drop from logic supply to brake output | 0.8V |
Number of inputs for motor temperature sensor | 1 |
Controller operating mode | Cascade control |
Mode of operation | Field-oriented regulation |
Ethernet interface, function | Parameterization and commissioning |
Ethernet interface, protocol | TCP/IP |
Fieldbus interface, protocol | EtherCAT |
Fieldbus interface, function | Bus connection, incoming/forwarding |
Fieldbus coupling | EtherCAT |
Communication profile | CiA402 |
Process interfacing | AC1: Adjustable-Speed Drives |
Fieldbus interface, transmission rate | 100 Mbit/s |
Fieldbus interface, connection type | 2x socket |
Fieldbus interface, connection technology | RJ45 |
Encoder interface, function | BiSS-C |
Encoder interface 2, function | Incremental encoder |
Synchronization interface, function | Encoder emulation A/B/Z |
Encoder interface output, characteristics | 1 MHz maximum output frequency |
Encoder interface input, characteristics | 1 MHz maximum output frequency |
Number of digital logic inputs | 12 |
Input switching logic | PNP (positive switching) |
Characteristics of logic input | Freely configurable in some cases |
Logic input specification | Based on IEC 61131-2, type 3 |
Work range of logic input | -3V |
Number of high-speed logic inputs | 2 |
Time resolution of high-speed logic inputs | 1µs |
Number of digital logic outputs 24Â VÂ DC | 6 |
Switching logic at outputs | PNP (positive switching) |
Characteristics of digital logic outputs | Freely configurable in some cases |
Max. current of digital logic outputs | 20mA |
Number of high-speed switching outputs | 2 |
Time resolution of high-speed switching outputs | 1µs |
Number of floating switching outputs | 1 |
Max. current of the floating switching outputs | 50mA |
Number of analog setpoint inputs | 1 |
Characteristics of setpoint inputs | Differential inputs |
Work range of setpoint input | ± 10 V |
Operating range of analog inputs | ± 10 V |
Impedance of setpoint input | 70kOhm |
Safety function | Safe brake control (SBC) |
Safety integrity level (SIL) | Safe brake control (SBC)/SIL 3/SILCL 3 |
Performance Level (PL) | Safe brake control (SBC)/category 3, performance level e |
Diagnostic coverage | 97% |
SFF safe failure fraction | 99% |
Hardware fault tolerance | 1 |
Number of safe 2-pin inputs | 2 |
Number of diagnostic outputs | 2 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet