Measured variable | Mass flow rateVolumetric flow rate |
---|---|
Electrical connection 1, connection technology | Open end |
Analog output | 1 – 5 V |
CE marking (see declaration of conformity) | As per EU EMC directiveAs per EU RoHS directive |
Certification | RCM compliance mark |
Note on materials | RoHS-compliant |
Reverse polarity protection | for all electrical connections |
Flow direction | Unidirectional |
Type code | SFTE |
Measuring principle | Thermal |
Method of measurement | Heat loss |
Short-circuit protection | yes |
Housing material | PA-reinforced |
Mounting position | Any |
Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
KC characters | KC EMC |
Degree of protection | IP40 |
Overload protection | Available |
Material of cable sheath | TPE-U(PUR) |
Symbol | 991853 |
Electrical connection 1, connection type | Cable |
Operating medium | NitrogenCompressed air as per ISO 8573-1:2010 [6:4:4] |
Type of mounting | With accessoriesLine installationWith through-hole |
Nominal temperature | 23 °C |
Repetition accuracy in ± %FS | 1 %FS |
Min. load resistance of voltage output | 20 kOhm |
Electrical connection 1, number of pins/wires | 3 |
Rise time | 3 ms |
Flow rate detection range, start value | 0 l/min |
Cable length | 2.5 m |
Idle current | ≤ 17 mA |
Operating pressure | -0.9 bar … 10 bar |
Ambient temperature | 0 °C … 50 °C |
DC operating voltage range | 22 V … 26 V |
Temperature of medium | 0 °C … 50 °C |
Product weight | 37 g |
Flow rate detection range, end value | 1 l/min |
SFTE-1U-M5F-B-2.5K
$215.31
The SFTE flow transmitter is perfect for monitoring compressed air and non-corrosive gases. To record the flow rate, the non-linearized sensor signal is output as an analog voltage signal.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet