| Type code | SPAU |
|---|---|
| Electrical connection 1, connection technology | M12x1 A-coded as per EN 61076-2-101 |
| Electrical connection for input 1, connection pattern | 995386 |
| KC characters | KC EMC |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, number of pins/wires | 4 |
| Symbol | 995410 |
| Certification | RCM compliance mark |
| CE marking (see declaration of conformity) | As per EU EMC directiveAs per EU RoHS directive |
| Note on materials | RoHS-compliant |
| Measured variable | Relative pressure |
| Method of measurement | Piezoresistive pressure sensor |
| Pressure measuring range initial value | 0 bar |
| Pressure measuring range end value | 10 bar |
| Max. overload pressure | 15 bar |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4]Inert gas |
| Information on operating and pilot media | Operation with oil lubrication possible |
| Temperature of medium | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| ADC resolution | 12 bit |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature co-efficient in ± %FS/K | 0.05 %FS/K |
| Switching function | Freely programmable |
| Switching element function | N/C contact/N/O contact switchable |
| Max. output current | 100 mA |
| Analog output | 0 – 10 V4 – 20 mA1 – 5 V |
| Rise time | 3 ms |
| Max. load resistance of current output | 500 Ohm |
| Min. load resistance of voltage output | 10 kOhm |
| Short-circuit protection | yes |
| Protocol | IO-Link® |
| IO-Link®, protocol version | Device V 1.1 |
| IO-Link®, profile | Smart sensor profile |
| IO-Link®, function classes | Binary data channel (BDC)Teach channelProcess data variable (PDV)IdentificationDiagnostics |
| IO-Link®, communication mode | COM2 (38,4 kBd) |
| IO-Link®, SIO mode support | Yes |
| IO-Link®, port class | A |
| IO-Link®, process data width OUT | 0 Byte |
| IO-Link®, process data width IN | 2 Byte |
| IO-Link®, process data content IN | 14 bit PDV (pressure measurement)2 bit BDC (pressure monitoring) |
| IO-Link®, minimum cycle time | 3 ms |
| IO-Link®, data memory required | 500 byte |
| DC operating voltage range | 20 V … 30 V |
| Reverse polarity protection | for all electrical connections |
| Type of mounting | On service unit |
| Mounting position | Any |
| Pneumatic connection | Flange |
| Product weight | 80 g |
| Display type | Illuminated LCD |
| Displayable unit(s) | MPabarinchH2OinchHgkPammHgkgf/cm²psi |
| Setting options | IO-Link®Teach-inVia display and pushbuttons |
| Protection against tampering | IO-Link®PIN code |
| Threshold value setting range | 0 % … 100 % |
| Hysteresis setting range | 0 % … 90 % |
| Degree of protection | IP65 |
| Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
SPAU-P10R-MS4-F-L-PNLK-PNVBA-M12D
$248.28
Uniquely flexible in its connection: the pressure sensor SPAU. Whether for pressure measuring, pressure monitoring, or pressure sensing—all pressure values are visible for checking at all times. In IO-Link® mode, remote maintenance and parameterization are possible as well as simple sensor replication.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet