push-in fitting NPQH-D-G38-S10-P10 Size=Standard, Nominal size=8 mm, Type of seal on screw-in stud=Sealing ring, Assembly position=Any, Container size=10
| Fitting Type | Push-in Sleeve |
|---|---|
| Size | Standard |
| Nominal size | 8 mm |
| Type of seal on screw-in stud | Sealing ring |
| Assembly position | Any |
| Container size | 10 |
| Design structure | Push/pull principle |
| Operating pressure complete temperature range | ‘-0.95 … 20 bar |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:-:-]Water as per manufacturer’s declaration at www.festo.com |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance classification CRCÂ | 3 – High corrosion stress |
| Food-safe | See Supplementary material information |
| Ambient temperature | 0 … 150 °C |
| Max. tightening torque | 25 Nm |
| Product weight | 22.5 g |
| connection 1Â | Male thread G3/8 |
| connection 2Â | Push-in sleeve QS-10 |
| Materials note | Conforms to RoHS |
| Material housing | Nickel-plated brass |
| Material of threaded seal | FPM |
Reviews
There are no reviews yet