| Type code | CRSMT |
|---|---|
| Electrical connection 1, connection technology | Open end |
| Electrical connection 1, connection type | Cable |
| KC characters | KC EMC |
| Repetition accuracy | 0.2 mm |
| Electrical connection 1, number of pins/wires | 3 |
| Design | for T-slot |
| Based on norm | EN 60947-5-2 |
| Symbol | 991152 |
| Certification | RCM compliance mark |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX)As per EU EMC directive |
| Explosion prevention and protection | Zone 2 (ATEX)Zone 22 (ATEX) |
| ATEX category gas | II 3G |
| Type of ignition protection for gas | Ex nA IIC T4 X Gc |
| ATEX category for dust | II 3D |
| Type of (ignition) protection for dust | Ex tc IIIC T120°C X Dc |
| Explosive ambient temperature | -40°C <= Ta <= +85°C |
| Special features | Resistant to cooling lubricantsAlkali-proofAcid-proof |
| Note on materials | Halogen-freeRoHS-compliant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 85 °C |
| Switching output | PNP |
| On time | ≤ 1 ms |
| Switch-off time | ≤ 1 ms |
| Max. switching frequency | 180 Hz |
| Max. output current | 100 mA |
| Max. switching capacity DC | 2.8 W |
| Voltage drop | < 1.5 V |
| Minimum load current | 0 mA |
| Residual current | < 0.05 mA |
| Short-circuit protection | yes |
| Overload protection | Available |
| Rated operating voltage DC | 24 V |
| DC operating voltage range | 5 V … 30 V |
| Reverse polarity protection | for all electrical connections |
| Connection outlet orientation | Longitudinal |
| Connector cable test conditions | Cable chain: 5 million cycles, bending radius 75 mmTorsional resistance: > 300 000 cycles, ±270°/0.1 mFlexural strength: as per Festo standard |
| Cable length | 5 m |
| Cable characteristic | Standard + cable chain |
| Color cable sheath | Gray |
| Material of cable sheath | TPE-O |
| Insulating sheath material | PP |
| Wire ends | Cable end sleeve |
| Type of mounting | Can be inserted in slot from aboveScrewed tightly |
| Max. tightening torque | 0.6 Nm |
| Mounting position | Any |
| Product weight | 47.6 g |
| Housing colour | Black |
| Housing material | PAPPHigh-alloy stainless steel |
| Switching status indication | LED yellow |
| Function reserve indication | LED orange |
| Ambient temperature with flexible cable installation | -20 °C … 85 °C |
| Degree of protection | IP65IP69KIP68 |
| For use in the food industry | See supplementary material information |
CRSMT-8M-PS-24V-K-5,0-OE
$80.79
Corrosion and acid-resistant, ATEX-capable magnetoresistive cylinder switch for T-slot can be pushed in lengthways.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet