| Dimensions W x L x H | 42.2 mm x 125.8 mm x 76.5 mm |
|---|---|
| Power supply, type of connection | Terminal strip |
| Vibration resistance | Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6 |
| Ethernet interface, protocol | Modbus® TCPEasyIPTCP/IP |
| Fieldbus interface, connection type | Socket |
| Note on ambient temperature | -5 – 60 °C for vertical installation |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 65 mA |
| Ethernet interface, connection technology | RJ45 |
| Fieldbus interface, connection pattern | 995789 |
| Power supply, connection pattern | 995847 |
| Fieldbus interface, function | Bus connection, forwarding |
| Ethernet interface, transmission rate | 100 Mbit/s10 Mbit/s |
| Power supply, function | Electronics and sensors |
| Power supply, information on conductor diameter | 0.2 – 2.5 mm² for flexible conductors without cable end sleeves |
| Ethernet interface, function | Diagnostics |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| System parameter | Diagnostic memoryFail-safe responseSystem start |
| Ethernet interface, connection pattern | 995789 |
| Fieldbus interface, connection technology | RJ45 |
| Power supply, connection technology | Spring-loaded terminal |
| Fieldbus interface, protocol | EtherCAT Master |
| Shock resistance | Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 |
| Module parameters | Channel alarms for undervoltageChannel alarm bundlingAnalog module process value representationUndervoltage diagnostics |
| Diagnostics via LED | RunPower supply for electronics/sensorsSystem faultNetwork status, engineering port 1EtherCAT network statusForce modeLoad power supply |
| Ethernet interface, number of poles/wires | 8 |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power supply, number of pins/wires | 4 |
| Fieldbus interface, number of poles/wires | 8 |
| Max. number of modules | 10 |
| Power supply, conductor diameter | 0.2 mm² … 1.5 mm² |
| Width dimension | 18.9 mm |
| Type code | CPX-E |
| CPU data | 512 MB RAMDual core 666 MHz |
| Configuration support | CODESYS V3 |
| Additional functions | CODESYS V3 with SoftMotion |
| Control elements | DIL switch for RUN/STOP |
| Processing time | Approx. 200 µs/1 k instruction |
| IP address setting | DHCPVia CODESYS |
| Function blocks | Read CPX-E module diagnosticsand othersCPX-E diagnostic statusCopying of CPX-E diagnostic trace |
| Max. power supply | 0.333333333333333 |
| Flag | CODESYS variable concept120 kB remanent data |
| Power failure buffering | 20 ms |
| Programming software | CODESYS provided by Festo |
| Program memory | 12 MB user program |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Corrosion resistance class (CRC) | 0 – No corrosion stress |
| Storage temperature | -20 °C … 70 °C |
| Relative air humidity | Non-condensing95 % |
| Protection against direct and indirect contact | PELV |
| Degree of protection | IP20 |
| Ambient temperature | -5 °C … 50 °C |
| Certification | c UL us – Listed (OL)RCM compliance mark |
| Product weight | 145 g |
| Max. address capacity outputs | 64 byte |
| Max. address capacity inputs | 64 byte |
| Fieldbus interface, galvanic isolation | yes |
| Fieldbus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface, type | Ethernet |
| Type of mounting | With H-rail |
| Note on materials | Contains paint-wetting impairment substancesRoHS-compliant |
| Housing material | PA |
| Weight | 0.407921 lbs |
|---|---|
| Dimensions | 6.299213 × 5.708661 × 1.968504 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet