| Dimensions W x L x H | 42.2 mm x 125.8 mm x 76.5 mm |
|---|---|
| Power supply, type of connection | Terminal strip |
| Vibration resistance | Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6 |
| Fieldbus interface, connection type | 2x socket |
| Note on ambient temperature | -5 – 60 °C for vertical installation |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 75 mA |
| Diagnostics via bus | UndervoltageParameterization errorPROFIsafe addresses differentUpper limit value violatedLower limit value not complied withWire breakOver temperatureShort circuit |
| Fieldbus interface, connection pattern | 995789 |
| Power supply, connection pattern | 995847 |
| Fieldbus interface, function | Bus connection, incoming/forwarding |
| Power supply, function | Electronics and sensors |
| Power supply, information on conductor diameter | 0.2 – 2.5 mm² for flexible conductors without cable end sleeves |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| System parameter | Diagnostic memoryFail-safe responseSystem startForce mode |
| Fieldbus interface, connection technology | RJ45 |
| Power supply, connection technology | Spring-loaded terminal |
| Fieldbus interface, protocol | PROFINET RTPROFINET IRT |
| Shock resistance | Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 |
| Module parameters | Channel alarms for undervoltageChannel alarm bundlingUndervoltage diagnosticsAnalog module process value representation |
| Diagnostics via LED | System faultLoad power supplyNetwork errorPower supply for electronics/sensorsMaintenance requiredNetwork status, port 1Network status, port 2Force mode |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power supply, number of pins/wires | 4 |
| Fieldbus interface, number of poles/wires | 8 |
| Fieldbus interface, max. address volume for inputs | 64 byte |
| Max. number of modules | 10 |
| Power supply, conductor diameter | 0.2 mm² … 1.5 mm² |
| Width dimension | 18.9 mm |
| Type code | CPX-E |
| Configuration support | GSDML file |
| Max. power supply | 0.333333333333333 |
| Power failure buffering | 20 ms |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Corrosion resistance class (CRC) | 0 – No corrosion stress |
| Storage temperature | -20 °C … 70 °C |
| Relative air humidity | 95 %Non-condensing |
| Protection against direct and indirect contact | PELV |
| Degree of protection | IP20 |
| Ambient temperature | -5 °C … 50 °C |
| Certification | RCM compliance mark |
| Product weight | 145 g |
| Max. address capacity outputs | 64 byte |
| Note on outputs | 62 bytes with I/O diagnostic interface64 bytes without diagnostics64 bytes with status bits |
| Max. address capacity inputs | 64 byte |
| Information on inputs | 62 bytes with I/O diagnostic interface64 bytes without diagnostics62 bytes with status bits |
| Fieldbus interface, galvanic isolation | yes |
| Fieldbus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface, type | Ethernet |
| Type of mounting | With H-rail |
| Note on materials | RoHS-compliantContains paint-wetting impairment substances |
| Housing material | PA |
CPX-E-PN
$765.01
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet