Symbol | 00995566 |
---|---|
Certification | RCM compliance mark |
CE marking (see declaration of conformity) | As per EU EMC directive |
UKCA marking (see declaration of conformity) | To UK instructions for EMC |
Note on materials | RoHS-compliant |
Measured variable | Mass flow rate |
Flow direction | Unidirectional |
Measuring principle | Thermal |
Method of measurement | Heat loss |
Flow measuring range start value | 2l/min |
Flow measuring range end value | 200l/min |
Temperature measuring range start value | 0°C |
Temperature measuring range end value | 50°C |
Operating pressure | 0MPa |
Operating pressure | 0bar |
Operating medium | Argon |
Temperature of medium | 0°C |
Ambient temperature | 0°C |
Nominal temperature | 23°C |
Accuracy of flow rate | ± (3% o.m.v. + 0.3% FS) |
Accuracy of temperature in ± °C | 5°C |
Zero point repetition accuracy in ± %FS | 0.2%FS |
Repetition accuracy margin in ± %FS | 0.8%FS |
Temperature co-efficient margin in ± %FS/K | typ. 0. 1%FS/K |
Pressure influence of margin in ±%FS/bar | 0.5%FS/b. |
Switching output | 2 x PNP or 2 x NPN switchable |
Switching function | Window comparator |
Switching element function | N/C contact/N/O contact switchable |
On time | 10ms |
Switch-off time | 10ms |
Max. output current | 100mA |
Analog output | 0 – 10 V |
Flow characteristic curve, start value | 0l/min |
Flow characteristic curve, end value | 200l/min |
Temperature characteristic curve start value | 0°C |
Temperature characteristic curve end value | 100°C |
Output characteristic curve initial value | 0V |
End value output characteristic curve | 10V |
Output characteristic curve initial value | 4mA |
End value output characteristic curve | 20mA |
Max. load resistance of current output | 500Ohm |
Min. load resistance of voltage output | 20kOhm |
Short-circuit protection | yes |
Overload protection | Available |
Protocol | IO-Link® |
IO-Link, revision ID | V1.1 |
IO-Link, device profile | Function Extended identification |
IO-Link, transmission rate | COM3 |
IO-Link®, SIO mode support | Yes |
IO-Link, port type | Class A |
IO-Link, process data length output | 0bit |
IO-Link, process data length input | 64bit |
IO-Link®, process data content IN | Flow rate measured value 16-bit MDC |
IO-Link®, service data contents IN | Volume / mass measured value 32-bit |
IO-Link®, minimum cycle time | 1.2ms |
IO-Link®, data memory required | 500byte |
DC operating voltage range | 15V |
Idle current | 90mA |
Reverse polarity protection | for all electrical connections |
Electrical connection 1, connection type | Plug |
Electrical connection 1, connection technology | M12x1 A-coded as per EN 61076-2-101 |
Electrical connection 1, number of pins/wires | 5 |
Electrical connection for input 1, connection pattern | 00995383 |
Type of mounting | With through-hole |
Mounting position | Any |
Pneumatic connection | For pneumatic tubing outside diameter 8 mm |
Product weight | 160g |
Housing material | PA-reinforced |
Display type | Illuminated LCD, multi-color |
Displayable unit(s) | g |
Setting options | IO-Link® |
Protection against tampering | IO-Link® |
Degree of protection | IP65 |
Pressure drop | 100mbar |
Protection class | III |
Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
LABS (PWIS) conformity | VDMA24364-B1/B2-L |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet