| Symbol | 00995566 |
|---|---|
| Certification | RCM compliance mark |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Note on materials | RoHS-compliant |
| Measured variable | Mass flow rate |
| Flow direction | Unidirectional |
| Measuring principle | Thermal |
| Method of measurement | Heat loss |
| Flow measuring range start value | 0.1l/min |
| Flow measuring range end value | 10l/min |
| Temperature measuring range start value | 0°C |
| Temperature measuring range end value | 50°C |
| Operating pressure | 0MPa |
| Operating pressure | 0bar |
| Operating medium | Argon |
| Temperature of medium | 0°C |
| Ambient temperature | 0°C |
| Nominal temperature | 23°C |
| Accuracy of flow rate | ± (3% o.m.v. + 0.3% FS) |
| Accuracy of temperature in ± °C | 5°C |
| Zero point repetition accuracy in ± %FS | 0.2%FS |
| Repetition accuracy margin in ± %FS | 0.8%FS |
| Temperature co-efficient margin in ± %FS/K | typ. 0. 1%FS/K |
| Pressure influence of margin in ±%FS/bar | 0.5%FS/b. |
| Switching output | 2 x PNP or 2 x NPN switchable |
| Switching function | Window comparator |
| Switching element function | N/C contact/N/O contact switchable |
| On time | 10ms |
| Switch-off time | 10ms |
| Max. output current | 100mA |
| Analog output | 0 – 10 V |
| Flow characteristic curve, start value | 0l/min |
| Flow characteristic curve, end value | 10l/min |
| Temperature characteristic curve start value | 0°C |
| Temperature characteristic curve end value | 100°C |
| Output characteristic curve initial value | 0V |
| End value output characteristic curve | 10V |
| Output characteristic curve initial value | 4mA |
| End value output characteristic curve | 20mA |
| Max. load resistance of current output | 500Ohm |
| Min. load resistance of voltage output | 20kOhm |
| Short-circuit protection | yes |
| Overload protection | Available |
| Protocol | IO-Link® |
| IO-Link, revision ID | V1.1 |
| IO-Link, device profile | Function Extended identification |
| IO-Link, transmission rate | COM3 |
| IO-Link®, SIO mode support | Yes |
| IO-Link, port type | Class A |
| IO-Link, process data length output | 0bit |
| IO-Link, process data length input | 64bit |
| IO-Link®, process data content IN | Flow rate measured value 16-bit MDC |
| IO-Link®, service data contents IN | Volume / mass measured value 32-bit |
| IO-Link®, minimum cycle time | 1.2ms |
| IO-Link®, data memory required | 500byte |
| DC operating voltage range | 15V |
| Idle current | 90mA |
| Reverse polarity protection | for all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connection technology | M12x1 A-coded as per EN 61076-2-101 |
| Electrical connection 1, number of pins/wires | 5 |
| Electrical connection for input 1, connection pattern | 00995383 |
| Type of mounting | With through-hole |
| Mounting position | Any |
| Pneumatic connection | For pneumatic tubing outside diameter 6 mm |
| Product weight | 160g |
| Housing material | PA-reinforced |
| Display type | Illuminated LCD, multi-color |
| Displayable unit(s) | g |
| Setting options | IO-Link® |
| Protection against tampering | IO-Link® |
| Degree of protection | IP65 |
| Pressure drop | 100mbar |
| Protection class | III |
| Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
SFAB-10U-WQ6-PNLK-PNVBA-M12
$633.53
Flow sensor
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet