| Measured variable | Volumetric flow rateMass flow rate |
|---|---|
| Electrical connection 1, connection technology | Open end |
| Analog output | 1 – 5 V |
| CE marking (see declaration of conformity) | As per EU RoHS directiveAs per EU EMC directive |
| Certification | RCM compliance mark |
| Note on materials | RoHS-compliant |
| Reverse polarity protection | for all electrical connections |
| Flow direction | Unidirectional |
| Type code | SFTE |
| Measuring principle | Thermal |
| Method of measurement | Heat loss |
| Short-circuit protection | yes |
| Housing material | PA-reinforced |
| Mounting position | Any |
| Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
| KC characters | KC EMC |
| Degree of protection | IP40 |
| Overload protection | Available |
| Material of cable sheath | TPE-U(PUR) |
| Symbol | 991853 |
| Electrical connection 1, connection type | Cable |
| Operating medium | NitrogenCompressed air as per ISO 8573-1:2010 [6:4:4] |
| Type of mounting | With through-holeWith accessoriesLine installation |
| Nominal temperature | 23 °C |
| Repetition accuracy in ± %FS | 1 %FS |
| Min. load resistance of voltage output | 20 kOhm |
| Electrical connection 1, number of pins/wires | 3 |
| Rise time | 3 ms |
| Flow rate detection range, start value | 0 l/min |
| Cable length | 2.5 m |
| Idle current | ≤ 17 mA |
| Operating pressure | -0.9 bar … 10 bar |
| Ambient temperature | 0 °C … 50 °C |
| DC operating voltage range | 22 V … 26 V |
| Temperature of medium | 0 °C … 50 °C |
| Product weight | 40 g |
| Flow rate detection range, end value | 1 l/min |
SFTE-1U-Q4-B-2.5K
$207.65
The SFTE flow transmitter is perfect for monitoring compressed air and non-corrosive gases. To record the flow rate, the non-linearized sensor signal is output as an analog voltage signal.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet