| KC characters | KC EMC |
|---|---|
| Nominal width pressurization | 2.5 mm |
| Exhaust nominal width | 2.5 mm |
| Type code | VPPL |
| Actuation type | Electrical |
| Sealing principle | Soft |
| Mounting position | AnyPreferably upright |
| Design | Directly controlled piston regulator |
| Short-circuit protection | no |
| Safety instructions | VPPL safety position: if the power supply cable breaks, the outlet pressure will drop to 0 bar. |
| Symbol | 995268 |
| Reverse polarity protection | for all electrical connections |
| Reset method | Mechanical spring |
| Type of control | Direct |
| Valve function | 3-way proportional pressure control valve closed |
| Display type | LED display |
| Operating pressure | ≤ 50 bar |
| Pressure regulation range | 0.4 bar … 40 bar |
| Inlet pressure 1 | 0 bar … 50 bar |
| Max. pressure hysteresis | 0.3 bar |
| b-value | 0.25 |
| C value | 0.8 l/sbar |
| Standard nominal flow rate | 300 l/min |
| On switching time | 300 ms |
| DC operating voltage range | 21.6 V … 27.6 V |
| Duty cycle | 1 |
| Max. electrical power consumption | 26.7 W |
| Residual ripple | 0.1 |
| Analog output signal range | 4 – 20 mA |
| Analog input signal range | 4 – 20 mA |
| Setpoint/actual values | Current type 4–20 mA |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4]Inert gas |
| Information on operating and pilot media | Operation with oil lubrication not possible |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Corrosion resistance class (CRC) | 2 – Moderate corrosion stress |
| Temperature of medium | 5 °C … 50 °C |
| Degree of protection | IP65 |
| Ambient temperature | 5 °C … 50 °C |
| Product weight | 1100 g |
| Linearity error in ± % FS | 1 %FS |
| Temperature coefficient | 0.04 %/K |
| Repetition accuracy in ± %FS | 1 %FS |
| Electrical connection, diagnostic interface | Socket, M12, 5-pin, A-coded |
| Electrical connection IN | Plug, M12, 5-pin, A-coded |
| Electrical connection OUT | Plug, M12, 5-pin, A-coded |
| Type of mounting | With through-hole |
| Pneumatic connection 1 | Flange |
| Pneumatic connection 2 | Flange |
| Pneumatic connection 3 | Flange |
| Note on materials | RoHS-compliant |
| Housing material | AnodizedWrought aluminum alloy |
VPPL-3Q-3-0L40H-A4-A-S1-1
$2,670.45
Especially developed for higher pressures from 10 to 40 bar. As an individual device with threaded connections, the valve can be used in a variety of applications, for example in stretch blow molding of PET bottles in the food and beverage industry or on tire or brake test benches in the automotive industry.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.