Our standard pressure switch line with a variety of electrical ratings available. 15A and .1A are the most common versions and will typically have the shortest lead times. 15A is recommended for direct control of most current drawing devices. The .1A switch selection has gold plated contacts and is recommended for low amperage applications such as PLC and micro controlled interface. Other electrical options are available for specific application requirements. Pressure switches apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point (also called “On†pressure), the internal mechanism moves and changes the electrical state. When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the pressure signal drops below its reset point (also called “Off†pressure). The difference between the “On†pressure and the “Off†pressure is defined as the Differential or Hysteresis of the switch. This is an important characteristic for applications such as pressure switch-controlled compressor systems. For instance, the consumption and capacity of the system along with the differential of the switch will determine how often the compressor runs. Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part. Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset switches is not recommended. Do not back out the flat head screw above flush with the body.
F5100100FM10A, Flush Mount Pressure Switch 100 PSI 10 AMP
$18.97
Only logged in customers who have purchased this product may leave a review.
Related products
-
F2815121B85, 0.012 Inch Molded Orifice, 1/8 Inch Barbs
Orifice Restrictors $1.71 Add to cartRated 0 out of 5(0) -
F2815141PC, 0.014 Inch Molded Orifice, 1/16 Inch Straight Port, Polycarbonate
Molded Orifice Restrictors $0.77 Add to cartRated 0 out of 5(0) -
F2815161B85, 0.016 Inch Molded Orifice, 1/8 Inch Barbs
Orifice Restrictors $1.71 Add to cartRated 0 out of 5(0) -
F2815041, 0.004 Inch Molded Orifice, 1/16 Inch Straight Port, Polysulfone
Orifice Restrictors $0.77 Add to cartRated 0 out of 5(0)
Reviews
There are no reviews yet.