| Type code | CMMP-AS |
|---|---|
| Active PFC | yes |
| Line filter | Integrated |
| Safety function | Safe stop 1 (SS1)Safe torque off (STO) |
| Safety integrity level (SIL) | Safe torque off (STO)/SIL 3/SILCL 3 |
| Performance Level (PL) | Safe torque off (STO)/category 4, performance level e |
| Display | Seven-segment display |
| Output frequency | 0 Hz … 1000 Hz |
| Output voltage range AC | 3x 0 – 270 V |
| Braking resistor | 60 Ohm |
| Diagnostic coverage | 0.97 |
| Characteristics of digital logic outputs | Freely configurable in some casesGalvanically isolated |
| Hardware fault tolerance | 1 |
| Impedance of setpoint input | 20 kOhm |
| Pulse power of braking resistor | 2.8 kVA |
| Max. current of digital logic outputs | 100 mA |
| Max. peak current duration | 5 s |
| Max. DC link voltage | 320 V |
| Nominal output current | 2.5 A |
| Nominal operating voltage AC | 230 V |
| Controller nominal power | 500 VA |
| Nominal voltage, logic supply DC | 24 V |
| Nominal current | 2 A … 3 A |
| Mains frequency | 50 Hz … 60 Hz |
| Parameterization interface | USBEthernetParameterization and commissioning |
| Nominal operating voltage phases | 1-phase |
| SFF safe failure fraction | 0.9917 |
| Peak power | 1000 VA |
| Peak current per phase, effective | 0.208333333333333 |
| Max. current consumption for logic supply without clamping brake | 0.55 A |
| Contamination level | 2 |
| Permissible range of logic voltage | ± 20 % |
| Permissible voltage fluctuations | +/- 10 % |
| Certificate issuing authority | German Technical Control Board (TÃœV) Rheinland |
| CE marking (see declaration of conformity) | As per EU low voltage directiveas per EU machinery directiveAs per EU EMC directive |
| Storage temperature | -25 °C … 70 °C |
| Relative air humidity | 0 – 90 % |
| Degree of protection | IP20IP10 |
| Ambient temperature | 0 °C … 40 °C |
| Certification | RCM compliance markc UL us – Listed (OL) |
| Proof test interval | 20 y |
| Product weight | 2100 g |
| Number of analog monitor outputs | 2 |
| Number of analog setpoint inputs | 2 |
| Number of digital logic outputs 24 V DC | 5 |
| Number of digital logic inputs | 10 |
| Communication profile | DS301/DSP402 |
| Process interfacing | For 256 positioning blocksI/O coupling |
| Work range of logic input | 8 V … 30 V |
| Working range of monitor outputs | ± 10 V |
| Work range of setpoint input | ± 10 V |
| Resolution of monitor outputs | 9 bit |
| Encoder interface output, characteristics | Resolution 16384 ppr |
| Encoder interface input, characteristics | RS422EnDat®SINCOSHIPERFACE3-phase encoder signals |
| Characteristics of monitor outputs | Short circuit-proof |
| Characteristics of setpoint inputs | Configurable for currentConfigurable for rotational speedDifferential inputs |
| Characteristics of logic input | Freely configurableGalvanically isolated |
| Output encoder interface, function | Actual value feedback via encoder signals in speed control mode.Setpoint specification for downstream slave actuator. |
| Input encoder interface, function | As speed setting of the slave actuator in synchronous mode.Encoder signal speed setpoint value. |
| Bus connection | Sub-D9-pinSocket |
| Fieldbus coupling | CANopenModbus®/TCP |
| Max. fieldbus transmission rate | 1 Mbit/s |
| Type of mounting | On sub-baseScrewed tightly |
| Note on materials | Contains paint-wetting impairment substancesRoHS-compliant |
CMMP-AS-C2-3A-M0
$1,567.00
A very cost-effective and compact motor controller with pulse train technology and integrated auto-tuning function. When combined with the EMMB-AS servo motor, it is ideal for simple positioning tasks in the electronics industry, small parts assembly, or for desktop applications
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.